Optimum Durability Upholstery Springs For Chairs , Upholstery Replacement Springs In Higher End Furniture

8-Way Hand Tied Sofa Coil Springs , 9G 6 Inch Upholstery Coil Springs , Zinc Plating

Product Descriptions & Application

The “double coil” spring has a larger open coil at each end. They are sold by Tons, but you also can buy the number as you require. They are available in different heights and firmness.

They must be fastened to a webbed, wood or metal strap seat foundation. Next, they are anchored to the frame.

This is done by tying them to the desired height and firmness using spring twine. Sometimes this is referred to as “8-way hand tied”. This is the best way, but not all tying follows this method.

Coil springs are more common in older furniture. They are used today in higher end furniture. They range in height from 4 (11 gauge) to 14 (8 gauge) inches. The heavier gauge springs - 9-11 - are used in seats. Each size can be obtained in 3 different grades of firmness - hard, medium and soft. The height of the spring is dependent on the style of the seat.

Double Cone Springs General Guidelines

9 gauge (3.65mm) are used for chair and sofa seats
10 gauge (3.25mm) are used for dining seats, small chair seats and sofa backs.
12 gauge (2.64mm) the thinnest are used for sofa and chair arms.

Diameter across the top and bottom of the springs approx.

3.5"/9cm for springs 4" and 5" high
4"/10cm for springs 6",7" and 8" high
4.5"/11cm for springs 9" and 10" high

Product Details

Advantages Of Coil Springs

- Excellent strength

- Optimum durability

- Fine finish

- Highly demanded in furniture industry

- Different sizes are available

Product Photo